OEM heated grips or other?

[patten84]

Has anybody fitted the OEM heated grips, are they easy fit? Any pictures of them fitted?

Is there a better aftermarket alternative, i don't like the look of the oxford control panel, thus the reason for the post!

[tiggersteve]

There is a pair on e-bay, looks a good price, can't comment on Sport grips but I have bought a pair of 'Ultimate addons' from Sportsbike shop I liked the integrated button in the grips, researched them on youtube

https://www.ebay.co.uk/itm/115953958240?var=0&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338749392&toolid=20006&customid=GB_131090_115953958240.143601850715~1935558235917-g_EAIaIQobChMI0aWqpIGwggMVWopQBh2LMQRXEAQYASABEgK8Y_D_BwE

[patten84]

Thanks for that reply! Could you share an image of the Ultimate Add on's , how they look on the tiger? How easy were they to wire up?

[Dustywheels]

I fitted a pair of Whites integrated grips. If you use the search function on this site, there's lots of info. I belive they are sold under a number of name/models around the world

[tiggersteve]

The ones on Dusty's are the same as the ultimate add-ons over here, I have yet to fit mine it's one of the many winter tasks

[patten84]

Originally Posted by Dustywheels

I fitted a pair of Whites integrated grips. If you use the search function on this site, there's lots of info. I belive they are sold under a number of name/models around the world

They look really neat, were you able to wire them into the harness that's already there or how did you go about it?

[Dustywheels]

Originally Posted by patten84

They look really neat, were you able to wire them into the harness that's already there or how did you go about it?

As the oem grips that were fitted no longer worked, I was able to graft the oem connector from them on to my new grips wiring. Which allowed me to just use the oem heated grips outlet located under the fuel tank.
I'm not aware of a source for the oem  connector, so finding a burnt out set of triumph grips seems to be the only option. Adds a few more dollars to the over all job, but makes for a much neater job and avoids cutting the oem wiring loom to fit a aftermarket connector