Author No power to tail light  (Read 439 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Esmets   gb

    • Tiger Newbie  ‐    1
    • *
    • Topic Author

    Offline Esmets

    • Tiger Newbie
    • *
    • Topic Author
    • Posts: 1
    • Bike/Model: 2010 Tiger 1050 se
    • City / Town: Darlington
    • Country: gb
    No power to tail light
    on: 16 January, 2023, 11:55:53 am
    16 January, 2023, 11:55:53 am
    Hi everyone!

    New to the forum as I've recently bought a 2010 tiger 1050 abs that looks like it has had a very hard life as a London commuter bike, which I'm now tidying up and fixing the various issues it has.

    One of the issues I am stuck on so was wondering if anyone could give me some advice. The bike isn't getting any power to the tail light, specifically the yellow wire that runs off the ignition switch. The number plate light also is not getting power, however, the sidelight and indicators are working fine.

    I would imagine the mostly likely thing is that the wire has got damaged somewhere, but wanted to find out at what points does the wire coming off the ignition plug splits to feed the tail and number plate lights, and also where the number plate and tail light split as well. Hopefully I'll be able to pinpoint the issue by checking those areas first.

    Thanks in advance!


  • Offline Carlos pinto   gb

    • Tiger Member  ‐    18
    • **

    Offline Carlos pinto

    • Tiger Member
    • **
    • Posts: 18
    • Love my tiger 1050
    • Bike/Model: 2011 Tiger 1050
    • City / Town: Attleborough
    • Country: gb
    Re: No power to tail light
    Reply #1 on: 16 January, 2023, 04:20:22 pm
    16 January, 2023, 04:20:22 pm
    I'm facing similar electrical issues
    No plate light,so are my left indicator flashing at different rates
    I'm afraid to turn the high beam because at the times the head light stops working.
    Carlos pinto