Author Fitting centre stand…… help  (Read 865 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Clintspur   england

    • Tiger Member  ‐    50
    • **
    • Topic Author

    Offline Clintspur

    • Tiger Member
    • **
    • Topic Author
    • Posts: 50
    • Bike/Model: Tiger sport 1050 2014
    • City / Town: Barnstaple
    • Country: england
    Fitting centre stand…… help
    on: 01 December, 2022, 12:09:01 pm
    01 December, 2022, 12:09:01 pm
    Hi
    Has anyone fitted a SW Motech stand to a 2014 Tiger Sport 1050 ???
    I’ve near enough done it,……BUT, I cannot do the locknut up on the small part that stops centre stand banging against exhaust bracket.
    There is nothing I can do to get anything on the bolt to help tighten it !!!!
    Has anyone done this ???

  • Offline Sidewinder   gb

    • Tiger Master  ‐    968
    • ****
      #1

    Offline Sidewinder

    • Tiger Master
    • ****
    • Posts: 968
    • Bike/Model: 2007 Tiger 1050 Yellow
    • City / Town: Sheffield
    • Country: gb
    Re: Fitting centre stand…… help
    Reply #1 on: 01 December, 2022, 01:11:09 pm
    01 December, 2022, 01:11:09 pm
    wedge a flat blade screwdriver, chisel or something wedge shaped between a flat on the nut and the wall of the recess.

  • Offline Clintspur   england

    • Tiger Member  ‐    50
    • **
    • Topic Author
    • #2

    Offline Clintspur

    • Tiger Member
    • **
    • Topic Author
    • Posts: 50
    • Bike/Model: Tiger sport 1050 2014
    • City / Town: Barnstaple
    • Country: england
    Re: Fitting centre stand…… help
    Reply #2 on: 01 December, 2022, 02:02:32 pm
    01 December, 2022, 02:02:32 pm
    @sidewinder
    That is what I ended up doing
    Took two of us about an hour
    Finally got it all done and working  :152:

  • Online Yellow Dog   gb

    • Tiger Supporter
    • Supreme Tiger  ‐    10631
    • *
      #3

    Online Yellow Dog

    • Tiger Supporter
    • Supreme Tiger
    • *
    • Posts: 10631
    • Bike/Model: 2018 Tiger 1050 Sport
    • City / Town: Quainton
    • Country: gb
    Re: Fitting centre stand…… help
    Reply #3 on: 02 December, 2022, 11:20:52 am
    02 December, 2022, 11:20:52 am
    Well done Clintspur  :028:

    Can be quite fiddly  :169:
    2018 TIGER 1050 SPORT - 40,000Km with zero tyre wear & zero engine or chain wear (c8