Mirror solutions?

[Clintspur]

Originally Posted by gvy

Hi ,

Here you go .
I think these must be the same as mine in the above picture :
They are street triple 2007-2008, mine are street triple 2010 , but I think they must be the same.

https://www.ebay.co.uk/itm/263766846728?hash=item3d69baad08:g:PRIAAOSwo4pYXRoP&amdata=enc%3AAQAHAAAAsFfxV3zE9dpc9XIq%2Bs8yiJ%2F59VBQ2mHyJJRWDHz7MLnR0hH8vWbfFVgVVuCfwBJiUjR7TYS%2FHhILP5%2FJiEnDfptCxuccdDP9iAlYWWKl1Gkk7A210%2BauALf3%2BmUDuqdFau5Y8eQLoXqLnIPDW22yskRtfl8ZdvE3fgLLN1IoFrgpYv9gMbKouW8S3Vl31h%2B6c8%2Btc878bETp9k8iSqn6u59%2Fp4vl1BWMlEMJC53TKWkS%7Ctkp%3ABk9SR7j8lfTxYA

Plenty of other 2007-2011 street triple 675  right side and left side on ebay often at 25£/each

Thanks gvy……. 

[seangee]

Here you go for the Aprilia ones. Far more sensibly priced - and that is new
https://www.fowlersparts.co.uk/parts/view/AP8104921
https://www.fowlersparts.co.uk/parts/view/AP8104922

[ZuluTiger]

I know it's easier to just bolt on a mirror, but bar-ends are not mutually exclusive with handguards. I fitted CRG's to both my Triumph and KTM, with a modicum of fiddling. The optics are incredible and there is no chance of shoulders getting in the way. The big bonus is that they are fold-away in traffic. Just saying. Here are some pics from the original installation.

[gosling 1]

Originally Posted by seangee

Here you go for the Aprilia ones. Far more sensibly priced - and that is new
https://www.fowlersparts.co.uk/parts/view/AP8104921
https://www.fowlersparts.co.uk/parts/view/AP8104922

There is a better Aprilia option, the Tuono V4 mirrors look identical to the Shivers but have longer stalks. Aprilia used these mirrors, (part #'s 896663/858539) on all the Tuono V4's, the previous generation V2's used something different. Also, Moto Guzzi uses the identical longer stalk mirrors on their V85TT, (all Variants). Guzzi sells them under part #'s 2B006207/2B006208. I have compared the Tuono V4 and V85TT mirrors and they are exactly the same. I have attached some pictures comparing the Tuono V4 mirrors with a set of brand new Shiver mirrors, (part #'s AP8104921/AP8104922). The last picture is of the Tuono V4 mirror on my 2008 Tiger, the measurement from the outer edge of the mirror to where the stalk enters the rubber boot is 12' (305mm).

These bolt straight on to the older Tiger 1050's and both mirrors have RH threads.

 

[Glasgowtiger]

Mirror extensions are available on eBay for not a lot they worked perfectly for me think they were about 15 quid

[turtle]

I have the Aprilia Shiver mirrors on mine.  They work great. They are wider than the factory mirrors, they vibrate much less, and they look good, much more current in appearance than the Tiger OEM mirrors.  I had the extenders, but the vibes were pretty bad, and they weren't the most handsome solution either, IMHO. 

[Clintspur]

Would these shiver ones fit ??

[turtle]

Originally Posted by Clintspur

Would these shiver ones fit ??

Being that those don't look like OEM Aprilia mirrors, more like "will fit", I can't comment from experience.  I would not recommend them though; not sure what you'd get, dimension wise.  Ebay is the ticket for some Aprilia mirrors if you are patient. 

[seangee]

Agree - thise are not Aprilia Oe mirrors. Got mine from Fowlers and IIRC a lot cheaper than that ad

[ZuluTiger]

https://www.motea.com/en/mirror-with-e-mark-for-triumph-tiger-1050-rear-view-mirrors-ece-zaddox-rsx2-black-a489543-0

What's not to like? They come with adapters, look good, and are cheaper than the ones above...