Author 2008 Tiger 1050 Secondary injection solenoid resistance value.  (Read 369 times)

0 Members and 1 Guest are viewing this topic.

  • Offline NettleMoto   us

    • Tiger Newbie  ‐    1
    • *
    • Topic Author

    Offline NettleMoto

    • Tiger Newbie
    • *
    • Topic Author
    • Posts: 1
    • Bike/Model: 08 Triumph Tiger 1050
    • Country: us
    2008 Tiger 1050 Secondary injection solenoid resistance value.
    on: 15 August, 2022, 04:17:52 am
    15 August, 2022, 04:17:52 am
    Hey fellas,

    I recently purchased a 2008 Tiger 1050 and the previous owner had installed block off plates but left the solenoid valve in place. Is it possible to just solder a resistor in place of the solenoid valve? and if so what is the resistance value required? Thanks!

  • Offline Cloudy   nz

    • Tiger Member  ‐    87
    • **
      #1

    Offline Cloudy

    • Tiger Member
    • **
    • Posts: 87
    • Bike/Model: 2007 Tiger 1050
    • City / Town: Gordonton
    • Country: nz
    Re: 2008 Tiger 1050 Secondary injection solenoid resistance value.
    Reply #1 on: 15 August, 2022, 05:55:39 am
    15 August, 2022, 05:55:39 am
    Get TuneECU and turn it off with that, then you can remove the solenoid completely.
    07 Tiger 1050, K&N Air Filter, Snorkel Removed, Stock Exhaust, 20543 Map, NGK Iridium Plugs, Ricks R/R, Ohlins Rear Shock, Ohlins Front Springs, Bar End Mirrors, Leather Seat Cover, Ebay Levers, Ebay Risers, Custom Bars.

  • Offline indytiger1050   us

    • Tiger Supporter
    • Supreme Tiger  ‐    22305
    • *
      #2

    Offline indytiger1050

    • Tiger Supporter
    • Supreme Tiger
    • *
    • Posts: 22305
    • Bike/Model: 79 Honda 750L
    • City / Town: Indianapolis
    • Country: us
    Re: 2008 Tiger 1050 Secondary injection solenoid resistance value.
    Reply #2 on: 15 August, 2022, 08:34:47 pm
    15 August, 2022, 08:34:47 pm
    *Originally Posted by Cloudy [+]
    Get TuneECU and turn it off with that, then you can remove the solenoid completely.
    :0461:



    OP slow by new members  area and post up a pic with your story as you feel fit.

    World wide, allows us to get a taste of this small place with a motorcycle we love.

    You might want to get some block off plates if your pulling the SAI valve, left mine in really helps with the F1 sound and visuals also didn't see the need or benefits of pulling it or turning it off.
    Also left the O2 sensor in to allow adaptions for better performance which is what I wanted. Biggest surprise of tune was smoothing out some of the abrupt throttle response.
    Depending on your setup try my tune many have enjoyed similar benefits another plus of getting the software mentioned. 
    Cloudy, what bits for the blue tooth adapter etc are you using. The programs I had used a cable direct to laptop usb. 
    Wouldn't mind getting those bits for my old toy. Gift for son in law.

    Support the forum.   :031:

  • Offline Cloudy   nz

    • Tiger Member  ‐    87
    • **
      #3

    Offline Cloudy

    • Tiger Member
    • **
    • Posts: 87
    • Bike/Model: 2007 Tiger 1050
    • City / Town: Gordonton
    • Country: nz
    Re: 2008 Tiger 1050 Secondary injection solenoid resistance value.
    Reply #3 on: 15 August, 2022, 08:42:47 pm
    15 August, 2022, 08:42:47 pm
    I'm using the Lonelec cable with adaptor on my phone.
    07 Tiger 1050, K&N Air Filter, Snorkel Removed, Stock Exhaust, 20543 Map, NGK Iridium Plugs, Ricks R/R, Ohlins Rear Shock, Ohlins Front Springs, Bar End Mirrors, Leather Seat Cover, Ebay Levers, Ebay Risers, Custom Bars.

  • Offline indytiger1050   us

    • Tiger Supporter
    • Supreme Tiger  ‐    22305
    • *
      #4

    Offline indytiger1050

    • Tiger Supporter
    • Supreme Tiger
    • *
    • Posts: 22305
    • Bike/Model: 79 Honda 750L
    • City / Town: Indianapolis
    • Country: us
    Re: 2008 Tiger 1050 Secondary injection solenoid resistance value.
    Reply #4 on: 22 August, 2022, 04:28:12 pm
    22 August, 2022, 04:28:12 pm
    *Originally Posted by Cloudy [+]
    I'm using the Lonelec cable with adaptor on my phone.
      Looked them up, see a USB nothing that would work on my Samsung tablet connector. 

    What adapter are you using or link to both would be very nice. 
    Support the forum.   :031:

  • Offline Cloudy   nz

    • Tiger Member  ‐    87
    • **
      #5

    Offline Cloudy

    • Tiger Member
    • **
    • Posts: 87
    • Bike/Model: 2007 Tiger 1050
    • City / Town: Gordonton
    • Country: nz
    Re: 2008 Tiger 1050 Secondary injection solenoid resistance value.
    Reply #5 on: 22 August, 2022, 08:57:22 pm
    22 August, 2022, 08:57:22 pm
    You just need a USB female to micro USB/USB C OTG (On The Go) cable. Just depends what connection your phone is using. Ebay is full of them for just a few dollars.
    07 Tiger 1050, K&N Air Filter, Snorkel Removed, Stock Exhaust, 20543 Map, NGK Iridium Plugs, Ricks R/R, Ohlins Rear Shock, Ohlins Front Springs, Bar End Mirrors, Leather Seat Cover, Ebay Levers, Ebay Risers, Custom Bars.

     



    reconstruction