Author Topic: Dipped beam / full beam - can they all be on at once?  (Read 4103 times)

0 Members and 1 Guest are viewing this topic.

#60

Offline naughtyG

  • Tiger Member
  • **
  • Topic Author
  • Posts: 32
  • Bike/Model: Tiger Sport 2016
  • City / Town: Fremantle WA
Re: Dipped beam / full beam - can they all be on at once?
Reply #60 on: 25 March, 2021, 12:02:16 PM
Got it.  Now just need best location to join these two cables and I'm defo having a go :)

#61

Offline naughtyG

  • Tiger Member
  • **
  • Topic Author
  • Posts: 32
  • Bike/Model: Tiger Sport 2016
  • City / Town: Fremantle WA
Re: Dipped beam / full beam - can they all be on at once?
Reply #61 on: 01 April, 2021, 10:52:03 AM
*Originally Posted by 19las87 [+]
Hi, it's simple.
You need to clip a yellow/white with a green cable.
In italy, i have used a "ruba corrente" have a cost like 1$. When u clip on a 2 wire, u need a scotch and reclose.
This is rubacorrente in italy. I don't kwow how i can translate.

https://i.ebayimg.com/00/z/r9IAAOSwLh5dB-N9/$_59.JPG

Hey any update on what location you spliced the cables at?

#62

Offline 19las87

  • Tiger Newbie
  • *
  • Posts: 7
  • Bike/Model: Tiger Sport '15
  • City / Town: Milano
  • Country: it
Re: Dipped beam / full beam - can they all be on at once?
Reply #62 on: 01 April, 2021, 11:10:55 AM
Yes, i put inside a elettrical block with some scotch, and u can close without problem. Or u can put outside from elettrical block, but i Need ti cut a cable outside, near a clutch wire

#63

Offline naughtyG

  • Tiger Member
  • **
  • Topic Author
  • Posts: 32
  • Bike/Model: Tiger Sport 2016
  • City / Town: Fremantle WA
Re: Dipped beam / full beam - can they all be on at once?
Reply #63 on: 04 April, 2021, 03:06:30 PM
Yes I got that, but wondered where you did it? In the headlight?

 



reconstruction