Author Topic: ABS Light  (Read 840 times)

0 Members and 1 Guest are viewing this topic.

Offline Ade Jokins

  • Tiger Newbie
  • *
  • Topic Author
  • Posts: 2
  • Bike/Model: Tiger 1050 SE
  • City / Town: Leicester
ABS Light
on: 09 November, 2020, 04:34:12 PM
Tiger SE 2010

Iíve refurbed my callipers and now the ABS light stays on.  Bled the brakes as normal without activating the ABS module.  Iíve ridden it loads over 6 mph so itís not that!

Plugged it into Tuneecu today to see the error code and it says it doesnít have one. It reads the wheels turning so the pick ups seem ok.

Any suggestions?

(For info it passed its MOT with the light on as itís not a fail on bikes)

#1

Offline ZuluTiger

  • Tiger Supporter
  • Tiger God
  • *
  • Posts: 2669
  • Bike/Model: Tiger 1050
  • City / Town: Suwanee
  • Country: us
Re: ABS Light
Reply #1 on: 09 November, 2020, 07:58:18 PM
Sounds like you damaged the pickup or the wiring...

#2

Online seangee

  • Tiger Supporter
  • Tiger God
  • *
  • Posts: 2874
  • Bike/Model: 16 Sport, '21 1290SAS
  • City / Town: Bracknell
  • Country: gb
Re: ABS Light
Reply #2 on: 09 November, 2020, 08:30:43 PM
If the speedo works chances are its in front. I would expect an error code though.

Does the ABS still work? According to the workshop manual there are some instances where this will be the case.
From the manual (Disclaimer: this is for the 16+ model)



Edit: Sorry those are 3 unrelated questions / statements.
Last Edit: 09 November, 2020, 08:33:05 PM by seangee
Nothing is foolproof to a sufficiently talented fool.

#3

Offline Ade Jokins

  • Tiger Newbie
  • *
  • Topic Author
  • Posts: 2
  • Bike/Model: Tiger 1050 SE
  • City / Town: Leicester
Re: ABS Light
Reply #3 on: 09 November, 2020, 11:01:39 PM
*Originally Posted by seangee [+]
If the speedo works chances are its in front. I would expect an error code though.

Does the ABS still work? According to the workshop manual there are some instances where this will be the case.
From the manual (Disclaimer: this is for the 16+ model)



Edit: Sorry those are 3 unrelated questions / statements.


Thanks, narrowing it down to potential ABS fuse but, where will find them?

#4

Offline ZuluTiger

  • Tiger Supporter
  • Tiger God
  • *
  • Posts: 2669
  • Bike/Model: Tiger 1050
  • City / Town: Suwanee
  • Country: us
Re: ABS Light
Reply #4 on: 09 November, 2020, 11:26:58 PM
You messed with the caliper. Might have stretched a few wires or broken them. You can put a meter on the sensor, spin the wheel and look for voltage. Google the test. Go back to the source before you get too complicated. Check the connections, for example.

#5

Offline Paullie

  • Tiger God
  • *****
  • Posts: 5722
  • Bike/Model: Tiger Sport (2014)
  • City / Town: Back in Blighty
  • Country: gb
Re: ABS Light
Reply #5 on: 10 November, 2020, 12:07:52 AM
Maybe check that the distance from the sensor to the ABS ring is correct according to the manual ...

 



reconstruction