Author Topic: Correct tune for 08 1050  (Read 2150 times)

0 Members and 1 Guest are viewing this topic.

#20

Online Tigermike

  • Tiger Supporter
  • Tiger God
  • *
  • Posts: 2087
  • Bike/Model: 2010 Bk/Grey 1050SE
  • City / Town: Banbury
  • Country: gb
Re: Correct tune for 08 1050
Reply #20 on: 17 January, 2021, 10:04:01 AM
Yes thats correct,  it shows the map number its based on.
I had the same question when I loaded Dave V2 map but trust me you will notice the difference when you go for the 1st ride  :152: (guessing you already have if you loaddx the new map on June )
No snatchy throttle at low speed And a bit more oomph when you open her up  :047:
Last Edit: 17 January, 2021, 10:11:00 AM by Tigermike
Yam RD125 DX, Kwak GPZ305, Honda CB400T, 1983 Kwak GT550, Suzuki GSF650 Bandit, Tiger 1050SE .... got there in the end.

#21

Offline JohnnyWheels

  • Tiger Supporter
  • Tiger Master
  • *
  • Posts: 322
  • Bike/Model: 2012 Tiger SE (red)
  • City / Town: Jackson, Mississippi
  • Country: us
Re: Correct tune for 08 1050
Reply #21 on: 17 January, 2021, 11:43:33 PM
*Originally Posted by Fourbears [+]
Right I thought I had loaded Dave's tune but TuneECU is showing a tune number. So I am not sure if I have loaded it! How do I tell?

Others more proficient at TuneECU may have other ways of telling the difference - you could take a screen shot of the map, then load Dave's Tune and compare the two to see if the maps are different. If it was me I'd probably just follow Indy's more straightforward advice - just load Dave's Tune and go for a ride. If you didn't have it before you will feel the difference within 10 miles. Plus, then at least you will know for sure what tune is in your bike.
-----------------------------------------------------
2012 Tiger 1050 SE

#22

Offline Frank T

  • Tiger Member
  • **
  • Posts: 21
  • Bike/Model: 2008 Tiger 1050
  • City / Town: Viby Sj.
Re: Correct tune for 08 1050
Reply #22 on: 29 January, 2021, 08:50:15 AM
I am new in this ECU tuning, and have downloaded ECU tuner app, and have read my ECU, but now I am wondering where I can find and download Dan V2`s mapping  :084: :027:
2008 Tiger 1050

#23

Offline toowheels

  • Tiger Supporter
  • Tiger Member
  • *
  • Posts: 26
  • Bike/Model: 2007 Tiger 1050
  • City / Town: Western Sydney
  • Country: au
Re: Correct tune for 08 1050
Reply #23 on: 29 January, 2021, 12:00:10 PM
Perhaps you mean Dave's tune v2 which can be found at reply #24 of Daves Stock 2010 on dyno Done by Dave. https://www.tiger1050.com/index.php/topic,24832.msg294650.html#msg294650. It's linked from the Performance Mod's mods thread, which is pinned at the top of the ECU Remapping section.
Last Edit: 29 January, 2021, 12:07:24 PM by toowheels
| 2007 Tiger 1050, no ABS, no CAT, no SAI | Delkevic 450mm exhaust | JBQ shifter | Centrestand | Teknik fork springs & modified shims | 25mm lowering plates | Bluebird Fender Extender | Ventura rack | Penrite MC-4ST 15W-50 | Mobil 1 M1MC-134 filter | Michelin Road 5 tyres |