Author LED headlight upgrade solution for Tiger 1050  (Read 7559 times)

0 Members and 2 Guests are viewing this topic.

  • Offline Dusty ST   gb

    • Tiger Supporter
    • Tiger Master  ‐    720
    • *
      #10

    Offline Dusty ST

    • Tiger Supporter
    • Tiger Master
    • *
    • Posts: 720
    • 123
    • Bike/Model: 2017 Tiger Sport 1050
    • City / Town: Brighton, Sussex
    • Country: gb
    Re: LED headlight upgrade solution for Tiger 1050
    Reply #10 on: 11 June, 2019, 02:02:19 pm
    11 June, 2019, 02:02:19 pm
    *Originally Posted by Javaman [+]
    My 2008 bog standard Tiger 1050 must have a relay from the get go because when I engage the starter, the headlights go out completely and so I 'm a little confused by the comments about drawing more current when starting the engine??? 

    That's standard, there's a relay (called something like switch over, or change over relay) that switches power from the lights to activate the starter solenoid.
    I'm not sure about the comments about drawing more current, as you say the lights are off when the starter is activated...
    The OEM delay relay is to prevent the HiDs going through a double strike to light them up (they come on with ign, then off when you thumb the starter button,
    and on again when you release the button), some reckon it reduces the life of the HID, but on my Sprint they've been fine for the last 25k+ miles.
    17 Tiger Sport 1050
    08 Sprint 1050ST (RIP)
    01 GSX1400 K2
    CCM Spitfire Street Moto

  • Online Javaman   gb

    • Tiger Master  ‐    278
    • ****
      #11

    Online Javaman

    • Tiger Master
    • ****
    • Posts: 278
    • Why Do Today What Will Wait Until Tomorrow?
    • Bike/Model: 2008 Tiger 1050
    • City / Town: Sleaford
    • Country: gb
    Re: LED headlight upgrade solution for Tiger 1050
    Reply #11 on: 11 June, 2019, 03:56:57 pm
    11 June, 2019, 03:56:57 pm
    *Originally Posted by Tigermike [+]
    there is an installation guide for Bi-Xenons in the stickies with photos which may help Javaman.
    https://www.tiger1050.com/index.php/topic,30838.0.html
    Good luck & keep us posted of the results  :031:


    Thanks Tigermike . . . that is one of many posts that I've read through and looking at the mess he make of his headlamp shell, the main reason I am dreading splitting the unit. His was quite clearly sealed using permaseal, which is what all the debris is lying all over the worksurface.  It seems some folks split these things quite easily and others have all sorts of problems.
    I am still waiting for my kit to arrive but in the meantime, scraped some surplus sealant off the outside of my headlamp in situ and it is definitely silicone - very soft and rubbery!!  On the one hand, it won't soften with heat but on the other, should offer far less resistance to being cut and so I will just have to see how I get on. I haven't given up on the idea of trying heat because although silicone won't itself soften, it is always possible that it will lose its "grip" on the plastic shell and perhaps let go more easily - ho hum . . . .  I will make a start when the kit arrives

  • Offline Fourbears   gb

    • Tiger Pro  ‐    131
    • ***
      #12

    Offline Fourbears

    • Tiger Pro
    • ***
    • Posts: 131
    • Bike/Model: Tiger 1050
    • City / Town: Norwich
    • Country: gb
    Re: LED headlight upgrade solution for Tiger 1050
    Reply #12 on: 12 June, 2019, 01:05:46 pm
    12 June, 2019, 01:05:46 pm
    If it is silicone then something like a scalpel will cut through it as they are a bit flexible unlike a craft knife blade.  I'm still thinking Tiger Sport headlamp is the way to go for me.  Let us know how you get on!

  • Offline SpokaneTom

    • Tiger Member  ‐    34
    • **
      #13

    Offline SpokaneTom

    • Tiger Member
    • **
    • Posts: 34
    • Bike/Model: 2010 Tiger 1050
    • City / Town: Spokane, WA
    Re: LED headlight upgrade solution for Tiger 1050
    Reply #13 on: 13 July, 2019, 02:11:15 am
    13 July, 2019, 02:11:15 am
    I thought I'd add to the thread a little.  Earlier this week my low beam bulb quick working, so I took the opportunity to buy and install Cyclops H7 & H9 LEDs just in the standard lenses.  I'm sure upgrading the lenses would be very beneficial, but I have to say that the new LEDs are amazingly bright.  I've been running with my brights on all the time just so others can see me better, but these are bright enough that I don't think I'll need to any longer.  True, they're not cheap, but very well made.  I don't ride at night much, but I'll have to try it and see how much improved it is.
    Tom
    2010 Triumph Tiger 1050, 2008 Yamaha WR250R
    www.mtcsw.com/BikeTrips

  • Offline Bull67   nl

    • Tiger Newbie  ‐    6
    • *
      #14

    Offline Bull67

    • Tiger Newbie
    • *
    • Posts: 6
    • Bike/Model: Tiger 1050/ 2007
    • City / Town: Middenmeer
    • Country: nl
    Re: LED headlight upgrade solution for Tiger 1050
    Reply #14 on: 31 October, 2023, 06:23:03 pm
    31 October, 2023, 06:23:03 pm
    Hi Javaman,

    How did you go on the retrofit xenons ?
    I also want to upgrade the head light of my 2007 Tiger over the winter period, but I'm still struggling if I need to go for the upgrade kit from retrofitlab (the LED version) or replace the headlight with the one from the Tiger sport (= more expensive, but less "breaking" work)
    Although I like the design of the initial headlight better, I have my doubts on splitting it and was wandering how difficult it is to do.

    Any suggestions will be appriciated.

     



    telegraph-coming