Tiger Sport 1050 Forum

Please login or register.

News: Warm welcome to our new members !

Author [ES] [MY] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Best map for standard set up  (Read 3498 times)

0 Members and 1 Guest are viewing this topic.

Offline Tigermike

  • Tiger Supporter
  • Tiger God
  • *
  • Posts: 1277
  • Bike/Model: 2010 Bk/Grey 1050SE
  • City / Town: Banbury
  • Country: United Kingdom
Re: Best map for standard set up
« Reply #40 on: 26 July, 2018, 10:41:42 PM »
*Originally Posted by tiggersteve [+]
If you can't sort a heat shield I could make you one,
distance between holes
diameter of pipe
and how much the studs stand off the pipe
I can measure the heat shield off mine at work tomorrow if you like and send you the dims and hole centres if it helps?
Nearly forgot c3rrr, I found that the heal guard was touching the link pipe so I put  washers on the 2 screws behind the heel guard just to give it a little bit of clearance so it didn't rub on the pipe  :028: but yours may not need it.  :031:
Yam RD125 DX, Kwak GPZ305, Honda CB400T, 1983 Kwak GT550, Suzuki GSF650 Bandit, Tiger 1050SE .... got there in the end.