GET YOUR STICKERS AND SUPPORT YOUR SITE

Following on from this thread in the  Forum, "rgh999" has been busy arranging Stickers for Members. Based on designs by "Pugmarx" the Stickers are now available. "Stretch" in the US is also heping to distribute them there.

As you can see below there are currently two designs:

Tiger Logo 

Tiger Blue Bike

These Stickers are 100mm in diameter and cost a paltry £1.81 each. By buying them you are supporting the site as well because a small amount goes towards the running costs (server, bandwidth etc.)

Please note: There are different ways to order depending on where you live - see below:

UK ORDERS

To order please send an email to:

You will automatically receive the postal address where to send your order as per instructions below.

In the email please state clearly how many you require of each

For example:

4 x TIGER BLUE BIKE

1 x TIGER LOGO

The cost is £1.81 per sticker. if paid by cheque/postal order. You must send a SAE which must be A5 size and have a £0.32p stamp for up to 8 stickers. If more than 8 then it must be A4 envelope and £0.44p stamp.
If using paypal £1.88 per sticker PLUS £0.20p per order. ie. £2.08 for 1 sticker £3.96 for 2, £5.84 for 3 etc. Plus SAE as above

Make chques etc  payable to: Richard Harrison. Include payment with SAE.

If you wish to pay by PayPal  then state this in your email and you will receive payment instructions. Because PayPal charge a fee, the Stickers will be slightly more expensive at £1.88 per sticker PLUS £0.20p per order. ie. £2.08 for 1 sticker £3.96 for 2, £5.84 for 3 etc. Plus SAE as above. 

Direct enquiries can be sent to:

EUROPE

Again orders to Richard but Paypal  ONLY at £1.88 per sticker PLUS 20p per order. Postage must be added at £1.67 per order up to 8 stickers. £2.15 9 to 16 stickers.

US, CANADA, and MEXICO ORDERS

Stickers for USA customers will be $4.05 each.
For each order (not each sticker), include 50 cents for shipping - this is for one envelope, and stamp.

Cash, check or money order (payable to Eric Frey) to:

Eric Frey
1860 Barnett Shoals Road
Suite 103, Box 531
Athens, GA  30605

Enquiries e-mail:  This e-mail address is being protected from spam bots, you need JavaScript enabled to view it

 INSTRUCTIONS FOR APPLYING STICKERS

These stickers may be applied wet or dry.
If wet easier to position and no air bubbles and will dry crystal clear.

1. Half fill a bottle with cold tap water and add a small squirt of washing up liquid, Fairy liquid is best.

2. Shake hard so the water turns slighty green and top half of bottle fills with suds

3. Pour fluid into tray. Take sticker off backing sheet and dip it into fluid. Place it on to surface to which it is being fixed. Place original backing sheet on to face of sticker and using a rubber squeegee carefully squeegee the water from the centre of the sticker. Be careful not to scratch or damage the print with the squeegee.

4. Dry excess moisture with a cloth. Leave for 1 to 2 hours and it will have adhered just as well as if it had been applied dry.

 

   Help TIGER1050.com grow by supporting YOUR site